|
Pacific Bear II presents a rare opportunity to acquire a substantial steel-hulled commercial vessel with significant refurbishment already undertaken and considerable potential for further development.
Built in 1983 by Sea-Fab of Pascagoula, Mississippi, Pacific Bear II measures 78'8" with a beam of 21'. Constructed with a robust steel hull and aluminum superstructure, powered by twin Caterpillar 3408 V8 diesels
The vessel was acquired with the intention of developing coastal sightseeing and day-cruise operations along the British Columbia coastline. An extensive refurbishment followed, including significant exterior structural improvements, expanded deck areas, new railings, a full-width stern boarding platform and substantial improvements to the vessel's exterior presentation.
Pacific Bear II is presently being offered as an unfinished refurbishment project. Survey and projected cost to finish available for serious clientele
|
|
- Overview
- Vessel Name: Pacific Bear II
- Manufacturer: Sea-Fab
- Year: 1983
- Model: Cruise Ship
- Length: 78' 8"
- Beam: 21'
- Vessel Location: Richmond, BC
- Power
- Engine: Twin Caterpillar 3408 V8 diesel engines, 400 HP each at 1,800 RPM
- Engine Hours: June 2024 survey: port 1,641 hours; starboard 1,650 hours.
- Gear/Ratio: Twin Disc 5114SC; 3:1 reduction
- Shafts: 4-inch stainless steel
- Prop: Five-blade bronze
- Cruising Speed: 11 knots
- Cooling: Keel cooled through Fenstrum coolers
- Auxilary Cooling: Raw-water / heat-exchanger system
- Bilge Pumps: Three electrically driven 1 1/2-inch centrifugal pumps, connected to a marked manifold
- Fuel: Diesel engines; six integral steel fuel tanks.
- Fuel Filtration: Water separators, Racor 1000 primary filters
- Hydraulics: Hydraulic steering system and custom hydraulic anchor windlass
- Generators: 2x 45 kw genset
- Structural
- Hull: Steel
- Decks: Steel
- Cabin/Superstructure: Aluminum
- Steering: Hydraulic steering; three-station Kobelt electronic engine controls
- Recent Exterior Work: Survey notes new/modified bulwarks and railings with hardwood caps
- Stabilizers: Stabilizer fin
- Anchor: Modified HighHold, 175 lb
- Anchor Windlass: Custom hydraulic
- Anchor Chain/Rode: 20 ft of 7/8-inch stainless chain; 300 ft of 3/4-inch, 3-strand nylon rode
- Electronics
- GPS / Chartplotters: Two Garmin plotters; depth sounder integrated with plotters
- Radar: New Garmin radar
- VHF: Two Garmin VHF radios
- Compass: 7-inch Ritchie magnetic compass
- Depth sounder: Integrated with Garmin plotters
- Spotlight: 12-inch Carlisle & Finch electrically controlled spotlight
- Horn: Three-trumpet air horn
- Batteries: 8D AGM starting batteries for main engines and auxiliaries
- Shore power: port and starboard
|