SF5027.jpg

Meridian
Stock # SF5027
39' x 11'

THIS BOAT HAS BEEN SOLD!!
Meridian has undergone an extensive refurbishment in the last 2 years, from top to bottom from stem to stern and is a turn key exceptional yacht.

Meridian was custom built in 1975 by Philbrooks at their Sydney boat yard. Her fiberglass hull is Airex foam cored. The topsides are teak. The decks are 1/2" teak overlay on 1/2" marine plywood. Newer Yanmar engine with low hours. This classic Herreshoff design makes for a strong, fast, handsome, sea kindly yacht built for serious sailors.

In a previous survey, Meridian is described as solidly built with premium materials, quality construction with a high standard of maintenance and carefully used. The owner is willing to hand this classic yacht over at a very modest price to the next discerning skipper who appreciates her pedigree.

List of improvements available upon serious requests.

MAJOR PRICE REDUCTION. OWNER OF TWO BOATS WANTS THIS ONE SOLD.

Specs

Overview
1975 Philbrooks Boatyards Herreshoff 37 Cutter Custom
Location: Lower Mainland, BC
39' x 11' x 6'
Power
Engine: Yanmar 27 hp diesel
Engine hours: Under 1,500
Cooling: Fresh water
Fuel consumption: 2 liters per hour
Fuel tank: Mild steel, 200 liters
Shaft: Dripless
Propeller: Campbell Sailor bronze, 3 blades
Cruising speed: 6.5 knots
Full speed: 7.5 knots
Engine alarm
Bilge pump: 1 manual, 1 electric 1500 gallons per hour
Accommodations
Sleeps: 4 - 1 stateroom
Stove: Dickinson diesel
Fridge: Ice box
Galley sink: Stainless steel
Head
Water tanks: 2, stainless steel and fiberglass, 65 gallons total
Holding tank: Plastic, 6 gallons
Heating: Diesel stove
Rigging / Sails
Rig type: Cutter or sloop
Main sail: North Sails
Jib/Genoa: 130%
Storm sails: 2 - Yankee
Headsail furling
Winches: 6 x Barient - 2 x Barlow
Standing rigging: Stainless steel
Structural
Decks: 1/2" teak laid in Thoikol over 1/2" marine ply
Hull: Hand laid fiberglass Airex cored
Cabin/Superstructure: Solid teak sides, fiberglass over marine ply roof
Keel style: Cutaway full keel
Material: Lead encapsulated in fiberglass
Rudder: Fiberglass over stainless steel stock
Steering: Tiller
Mast: Custom Liefeld
Anchors: 2 - CQR 35 lbs
Anchor windlass: ACW Ideal
Paint Awlgrip
Electronics
GPS / Plotter / VHF: Horizon
Sounder: Raymarine
Autopilot: Auto helm ST50
Batteries: House 2x Trojan 6v golf cart 1x 12V wet cell
Battery monitor: Marinetics
Compass and barometer
Additional
Washdown pump: High pressure at the bow
New since 2015/16
Pressurized water system
Dripless, propeller shaft and cutlass bearing
Lazy jacks on the main sail
Spinnaker

Listing Broker

Hans Ter Horst

Phone: 604-729-4626

Email: [email protected]


https://pacificboatbrokers.com/used-boats-for-sale/SF5027/herreshoff-37-custom-cutter.asp
Scan to view listing

HEAD OFFICE
 
Pacific Boat Brokers Inc.
#6 - 1025 Lee Rd.
Parksville, BC
Canada
V9P 2E1
Toll Free
1-877-448-0010

T 250-248-0010
F 250-248-4693
[email protected]
USA & MEXICO
 
Kodiak, AK (907) 942-5310

Gig Harbor, WA

(206) 817-4166
La Paz, Mexico (360) 332-9526
Please Note:
Great effort has been taken to provide accurate vessel information. However, Pacific Boat Brokers Inc. is not responsible for any errors or omissions, misrepresentations of equipment included, dimensions and capacities or general condition of vessels on this web site. We recommend purchasers conduct their own surveys and inspection of any potential vessel to their satisfaction
Copyright © 2024 Pacific Boat Brokers Inc.